【摘要】 kubernetes环境搭建考必过小编为大家整理了关于kubernetes环境搭建的信息，希望可以帮助到大家！

kubernetes环境搭建

标签：discover EOS ini 拷贝 flannel table esc wal des

节点信息

ip  主机名 角色  操作系统
192.168.157.130 master  主   centeos7.6+
192.168.157.131 ode1    节点  Centos7.6+
192.168.157.132 node2   节点  Centos7.6+

关闭防火墙相关

systemctl stop firewalld.service
systemctl stop iptables.service
systemctl disable firewalld.service
systemctl disable iptables.service

将 SELinux 设置为 permissive 模式(将其禁用)

setenforce 0
sed -i ‘s/^SELINUX=enforcing$/SELINUX=disabled/‘ /etc/selinux/config

关闭swap

swapoff -a
# 永久关闭, 需要注释掉/dev开头的文字
vim /etc/fstab

如下:

UUID=ed95c595-4813-480e-992b-85b1347842e8 /                       ext4   defaults       1 1
# /dev/vgdata/lvdata   /data ext4   defaults       0 0

3. 网桥配置

modprobe br_netfilter
cat <<EOF > /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF

使配置生效

sysctl -p /etc/sysctl.d/k8s.conf
ls /proc/sys/net/bridge

4. 安装docker

安装基本服务

yum install -y net-tools epel-release vim yum-utils device-mapper-persistent-data lvm2

配置docker和安装docker

yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum install -y docker-ce-18.06.0.ce
systemctl enable docker
systemctl start docker

cat <<EOF > /etc/docker/daemon.json
{
"insecure-registries":["0.0.0.0/0"],
"exec-opts": ["native.cgroupdriver=systemd"]
}
EOF
systemctl restart docker

5. 安装k8s相关

配置k8syum源

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

安装kubectl、kubelet、kubenetes-cni、kubeadm

yum install -y kubectl-1.14.1 kubelet-1.14.1 kubernetes-cni-0.7.5 kubeadm-1.14.1

设置开机启动

systemctl enable kubelet

准备k8s 需要的docker 镜像（因为外网原因，不能下载镜像）

cat > pullimages.sh << EOF
# 添加如下内容

docker pull mirrorgooglecontainers/kube-apiserver-amd64:v1.14.1
docker pull mirrorgooglecontainers/kube-controller-manager-amd64:v1.14.1
docker pull mirrorgooglecontainers/kube-scheduler-amd64:v1.14.1
docker pull mirrorgooglecontainers/kube-proxy-amd64:v1.14.1
docker pull mirrorgooglecontainers/pause:3.1
docker pull mirrorgooglecontainers/etcd-amd64:3.3.10
docker pull coredns/coredns:1.3.1

docker tag mirrorgooglecontainers/kube-controller-manager-amd64:v1.14.1 k8s.gcr.io/kube-controller-manager:v1.14.1
docker tag mirrorgooglecontainers/kube-scheduler-amd64:v1.14.1 k8s.gcr.io/kube-scheduler:v1.14.1
docker tag mirrorgooglecontainers/kube-apiserver-amd64:v1.14.1 k8s.gcr.io/kube-apiserver:v1.14.1
docker tag mirrorgooglecontainers/kube-proxy-amd64:v1.14.1 k8s.gcr.io/kube-proxy:v1.14.1
docker tag mirrorgooglecontainers/pause:3.1 k8s.gcr.io/pause:3.1
docker tag mirrorgooglecontainers/etcd-amd64:3.3.10 k8s.gcr.io/etcd:3.3.10
docker tag coredns/coredns:1.3.1 k8s.gcr.io/coredns:1.3.1

docker rmi mirrorgooglecontainers/kube-apiserver-amd64:v1.14.1
docker rmi mirrorgooglecontainers/kube-controller-manager-amd64:v1.14.1
docker rmi mirrorgooglecontainers/kube-scheduler-amd64:v1.14.1
docker rmi mirrorgooglecontainers/kube-proxy-amd64:v1.14.1
docker rmi mirrorgooglecontainers/pause:3.1
docker rmi mirrorgooglecontainers/etcd-amd64:3.3.10
docker rmi coredns/coredns:1.3.1

EOF

# 执行脚本
sh pullimages.sh

6. 主节点初始化

集群初始化（请记录初始化最后打印出的kubeadm join 信息）（IP根据实际情况修改）

kubeadm init --kubernetes-version=v1.14.1 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=`ifconfig eth0 |awk ‘{print $2}‘|sed -n "2,1p"`

记录：
kubeadm join ${IP_ADDRESS}:6443 --token p2f3ud.l44djf21s0nj7a5y   --discovery-token-ca-cert-hash sha256:866d6131855e1847bcec7481a184b42ea8616bbe95a9ffcf8dfcc64cdb38a905

# 复制配置
mkdir ~/.kube
cp -i /etc/kubernetes/admin.conf ~/.kube/config
chown $(id -u):$(id -g) ~/.kube/config

7. 主节点配置flannel网络

wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
kubectl apply -f kube-flannel.yml

使 master 节点参与工作负载

kubectl describe node | grep Taint
kubectl taint nodes --all node-role.kubernetes.io/master-

8. 子节点加入集群

注意: 【子节点执行】子节点加入集群（IP根据实际情况修改）

kubeadm join ${IP_ADDRESS}:6443 --token p2f3ud.l44djf21s0nj7a5y    --discovery-token-ca-cert-hash sha256:866d6131855e1847bcec7481a184b42ea8616bbe95a9ffcf8dfcc64cdb38a905

# 确认日志无报错

# 复制配置
mkdir ~/.kube
拷贝主节点的 ~/.kube/config 到 ~/.kube（命令:scp -r ${IP_ADDRESS}:/root/.kube/config ~/.kube/）
chown $(id -u):$(id -g) ~/.kube/config
# 在主节点查询 Ready 说明节点加入集群正常
kubectl get nodes

kubernetes环境搭建

标签：discover EOS ini 拷贝 flannel table esc wal des

以上就是kubernetes环境搭建的内容，更多资讯请及时关注考必过网站，最新消息小编会第一时间发布，大家考试加油！